Wistron Corporation BU7LTN Manual De Usuario
A hard disk drive problem
Problem:
The hard disk drive does not work.
Solution:
In the Boot menu in BIOS Setup Utility, make sure that the hard disk drive is
included in the Boot Order correctly.
included in the Boot Order correctly.
Other problems
Problem:
Your computer does not respond.
Solution:
v
To turn off your computer, press and hold the power button for 4 seconds or
more. If the computer still does not respond, remove the AC adapter and the
battery.
more. If the computer still does not respond, remove the AC adapter and the
battery.
v
Your computer might lock when it enters standby mode during a communication
operation. Disable the standby timer when you are working on the network.
operation. Disable the standby timer when you are working on the network.
Problem:
The computer does not start from a device you want.
Solution:
See the Boot menu of the BIOS Setup Utility. Make sure that the startup sequence in
the BIOS Setup Utility is set so that the computer starts from the device you want.
Also make sure that the device from which the computer starts is enabled. In the
Boot menu in the BIOS Setup Utility, make sure that the device is included in the
“Boot Order” list.
the BIOS Setup Utility is set so that the computer starts from the device you want.
Also make sure that the device from which the computer starts is enabled. In the
Boot menu in the BIOS Setup Utility, make sure that the device is included in the
“Boot Order” list.
Chapter 6. Troubleshooting
53