Wistron Corporation EM300 Manual De Usuario
EM300 Data Card Integration Guide
R&D Division, Handheld & Mobile Communication,
Taipei Design Center, Wistron Corp.
Engineering Specification
12
Getting Started
General
The purpose of this document is to provide advance design and integration information to assist
in the integration planning and evaluation of Wistron CorporationUSB Cards. This document is intended to
specify key components of the integration tools available for the Wistron Corporationline of USB Cards.
in the integration planning and evaluation of Wistron CorporationUSB Cards. This document is intended to
specify key components of the integration tools available for the Wistron Corporationline of USB Cards.
The EM300 MODULE are Wistron Wireless’ versatile modules that add WWAN capability to other devices.
They were developed to be integrated into other devices based on the USB Card specification 1.2
They were developed to be integrated into other devices based on the USB Card specification 1.2
The EM300 MODULE will work with all Windows driven laptops given the drivers are properly installed. When
MobiLink™ is installed on a Windows OS system it will automatically include the drivers necessary to
communicate with the USB Card. MobiLink™ is Wistron’s Windows application manager for the EM300
module. MobiLink provides an easy interface to make a data connection, change operating parameters, and
view alerts such as
SMS or signal strength indicator. However, anyone can still install the drivers manually. In addition, once the
drivers are installed, following the Wistron Client API functions, anyone could develop their Client side software
manager to interact with the USB Card.
MobiLink™ is installed on a Windows OS system it will automatically include the drivers necessary to
communicate with the USB Card. MobiLink™ is Wistron’s Windows application manager for the EM300
module. MobiLink provides an easy interface to make a data connection, change operating parameters, and
view alerts such as
SMS or signal strength indicator. However, anyone can still install the drivers manually. In addition, once the
drivers are installed, following the Wistron Client API functions, anyone could develop their Client side software
manager to interact with the USB Card.
When using any of these devices, EM300 MODULE, activation is required for the device to be allowed on the
operator’s network. For example, Sprint requires the customer to run IOTA (Internet Over-The-Air) provisioning
to prepare the device to work on the Corporationnetwork. Please refer to the Customer Configuration section on
provisioning with IOTA for assistance.
operator’s network. For example, Sprint requires the customer to run IOTA (Internet Over-The-Air) provisioning
to prepare the device to work on the Corporationnetwork. Please refer to the Customer Configuration section on
provisioning with IOTA for assistance.
The EM300 MODULE and require a valid SIM card before it can be used on the operator’s
Corporationnetwork. Please refer to the Customer Configuration section on PRI for further information.
Corporationnetwork. Please refer to the Customer Configuration section on PRI for further information.
Setting Up
The purpose of this section is to assist in the initial connection and provide the reader with
instructions for how to setup and establish communication with the Wistron Corporationline of USB Card. The
following setup guide refers to an EM300 MODULE HSDPA Mini-card for convenience of
the set up discussion. The same setup is valid for both the EM300 MODULE EDGE and Mini-cards.
instructions for how to setup and establish communication with the Wistron Corporationline of USB Card. The
following setup guide refers to an EM300 MODULE HSDPA Mini-card for convenience of
the set up discussion. The same setup is valid for both the EM300 MODULE EDGE and Mini-cards.
Setting up and establishing communication with the Wistron CorporationUSB Card involves:
o
Connecting the USB Card to the computer and the Development Board.
o
Establishing communication with the USB Card and determining the
computer COM Port being used.
computer COM Port being used.
o
Setting up and using the HyperTerminal program to communicate with the Mini-card
CONNECTING THE USB CARD TO THE COMPUTER AND THE DEVELOPMENT BOARD
Insert the USB Card into the Development Board (Wistron CorporationPart # 01017568)
by sliding the connector end of the Mini-card into the Molex connector. Push down on the opposite end
of the Mini-card until the 2 black locking tabs snap into place.
by sliding the connector end of the Mini-card into the Molex connector. Push down on the opposite end
of the Mini-card until the 2 black locking tabs snap into place.