Wistron Corporation D241H Manual De Usuario

3

Eng

lis

h

Setting up

To set up Acer Display+ as an independent display, please follow the steps 
below:
1

Connect the keyboard.

2

Connect the Ethernet cable or configure your Wi-Fi settings.

3

Connect external speakers (optional).

4

Connect the power cord to the monitor, then to a properly grounded AC 
outlet.

5

Turn the monitor on.

6

If the monitor does not function properly, please refer to the 
troubleshooting section to diagnose the problem.

To install Acer Display+ on your host system, please follow the steps below:
1

Connecting the video cable
a

Make sure both the monitor and computer are switched off.

b

Connect the VGA video cable to the computer. 

2

Connecting the HDMI cable.
a

Make sure both the monitor and computer are switched off.

b

Connect one end of the HDMI cable to the back of the monitor and 
the other end to the computer's port.

3

Connect the audio cable to the PC to play audio via display speaker.*

4

Connect external speakers.*

5

Connect the USB cable to the PC to enable the USB device and memory 
cards to act as extended hub for the PC.*

6

Connect the microphone cable to the PC to enable the built-in microphone 
on Acer Display+ to act as an extended microphone for PC use.*

7

Connect the power cord to the monitor, then to a properly grounded AC 
outlet.

8

Turn on the monitor first, then the computer. This sequence is very 
important.

9

If the monitor does not function properly, please refer to the 
troubleshooting section to diagnose the problem.

Note: * Steps 3 to 6 are optional.