Wistron Corporation IPNTYS05N Manual De Usuario

Note: Unless you need to dual pair a headset, operating the headset 
with the 1140E is simpler if the headset is only used with its charging-
only base. The desktop IP Deskphone base should be powered off if 
it is not in use.

If you connect a Bluetooth wireless technology headset and a wired 
headset to the same Avaya 1140E IP Deskphone, the “Use Bluetooth 
headset” item switches between the wired headset and the Bluetooth 
headset. If you select the “Use Bluetooth Headset” check box, the 
Bluetooth headset provides the audio. If you clear the “Use Bluetooth 
Headset” check box, the wired headset provides the audio.

The Bluetooth wireless technology headset can work only if it is within 
range of the phone; as the wireless headset approaches the edge of its 
radio range, the audio quality degrades and radio interference noise 
increases. When the wireless headset is in connecting range, the 

 key controls the wireless headset, even if a wired headset is 

attached. If a wireless headset moves out of connecting range, a special 
beep sounds in the headset indicating the connection was lost.

If a Bluetooth wireless technology headset is connected, and you want to 
use the wired headset, you can switch between the two. It is not 
necessary to unpair or disable the wireless headset.

You can switch between a wired and wireless headset and back again 
either when the phone is idle or during an active call.

1.

Double-press the 

 key to open 

the Bluetooth Setup dialog.

2.

Press the 

 navigation key to 

select the “Use BT Headset” item. 

(Headset)