Wistron Corporation IPNTYS05N Manual De Usuario

the CAT5 cable, your connected LAN must support PoE. If you use 
PoE, you do not require an AC adapter.

Note 2: You must use CAT5e (or later) cables if you want to use 
gigabit Ethernet.

3.

Install the handset. Connect the end of the handset cable with the 
short straight section into the handset. Connect the end of the 
handset cable with the long straight section to the back of the phone, 
using the RJ-9 handset jack marked with the symbol 

+

. Form a small 

bend in the cable, and then thread the handset cord through the 
channels in the stand so that it exits behind the handset on the right 
side, in the Handset cord exit in the stand base, as shown in 

4.

Install the headset (optional). If you are installing a headset, plug the 
connector into the RJ-9 headset jack on the back of the phone 
marked with the symbol 

), and thread the headset cord along with 

the handset cord through the channels in the stand, so that the 
headset cord exits the channel marked with the symbol 

).

5.

Install the Ethernet cable. Connect one end of the supplied Ethernet 
cable to the back of your phone using the RJ-45 connector marked 
with the symbol 

%, and thread the network cable through the channel 

marked with the symbol 

%.

6.

If you are connecting your PC through the phone, you require a 
second CAT5e cable. Only one cable is included with the 
Avaya 1140E IP Deskphone package. Install the Ethernet cable 
connecting the PC to the phone (optional). Connect one end of the 
PC Ethernet cable to your phone using the RJ-45 connector marked 
with the symbol 

( and thread it through the channel marked with the 

symbol 

(. Connect the other end to the LAN connector on the back 

of your PC. 

7.

Install additional cables. If applicable, plug in optional USB devices. 
Connect the Ethernet cable to the LAN Ethernet connection. If you 
are using a global power supply, plug the global power supply into an 
AC outlet.