Wistron Corporation LT1423PWCA Manual De Usuario
Table3-2.Troubleshooting
Problem
Possible cause
Suggested action
Reference
The image
The
USB cable
Be sure the
USB cable is
“Connecting and turning
quality is
is not connected
firmly plugged into the
on your monitor” on
unacceptable.
with the monitor system and monitor.
page 1-
3
or system
completely.
The power
“Connecting and turning
indicator is not
on your monitor” on
lit and there is
page 1-
3
no image.
The
USB cable
Be sure the USB cable is
is
loose or
connected properly.
disco nnected
with the
monitor or
system
.
Monitor is not
Have the battery charged
“Charging the battery”
power up
for a while, and then power on page 1-5
up the monitor by press
power button on the right
of the monitor.
One or more of
This is a
If there are more than
Appendix A, “Service and
the pixels
characteristic
five pixels missing,
Support,” on page A-1
appear
of the LCD
contact the Customer
discolored
technology
Support Center.
and is not an LCD
defect.
3-2
L
T1423pwCA Wide Touch Monitor User’s Guide
“Driver Installation” on
page 4-1
The LED
indicator is
indicator is
greenbut the
screen has no
display.
screen has no
display.
The driver is
not installed
correctly.
Please uninstall the
driverthen restart PC
and install the driver
and install the driver
again.
Make sure the desktop
Screen skewing, The desktop
"Using the On-Screen
(OSD) controls" on Page 2-3
have clear boundary or
picture not in
background have
open a file and maximize
the middle.
no clearly
it,then press left button
boundary when
or select Automatic item
monitor do auto
in the OSD,monitor
adjust.
will do adjust again.
Troubleshooting
If you have a problem
with setting up or using your monitor, you might be able to
solve it yourself. Before calling your dealer or Lenovo, try the suggested actions
that are appropriate to your problem.
that are appropriate to your problem.
In a multi monitor situation if the touch response is on a different monitor than the LT1423pwCA
then you can set the touch configurationAs below:
1. Open the Control Panel and find the monitor PC Setting which can setting for touch and pen.
2. Enter the monitor PC Setting and click the Setup item, then windows will show information
”What type of Screen do you want to identify”;
3. If you want to identify touch, please select ‘’Touch input’’, otherwise please select “Pen input”;
4. After you select one of them, you can identify your touch or pen follow the windows
prensentation.