Wistron Corporation MS2146BG Manual De Usuario

 

Peer-to-Peer mode, also called Ad Hoc mode, works without access points and allows 
wireless computers to send information directly to other wireless computers. Ad Hoc 
Mode is only supported in 802.11b and 802.11g networks. You can use Peer-to-Peer 
mode to network computers in a home or small office or to set up a temporary wireless 
network for a meeting.

 

There are three basic components that must be configured for an 802.11 wireless LAN to 
operate properly:

●     

Network Name: Each wireless network uses a unique Network Name to identify 
the network. This name is called the Service Set Identifier (SSID). When you set up 
your wireless adapter, you specify the SSID. If you want to connect to an existing 
network, you must use the name for that network. If you are setting up your own 
network you can make up your own name and use it on each computer. The name 
can be up to 32 characters long and contain letters and numbers.

●     

Profiles: When you set up your computer to access a wireless network, the 
wireless client manager creates a profile for the wireless settings that you specify. 
If you want to connect to another network, you can scan for existing networks and 
make a temporary connection, or create a new profile for that network. After you 
create profiles, your computer will automatically connect when you change