RadioFrame Networks Inc DH2 Manual De Usuario

Method of Procedure 
Operations and Maintenance 

RFN_3.1 Beta

 

DSP LOST PDU 

DSP is not sending any PDUs to the APC. 
The CPU received fewer than threshold 
PDUs within a fixed period from the DSP. 
SPAM is reset. 

 

DSP TX IQ FAIL 

DSP Tx counter is not incrementing as per 
expectations, implying that DSP has 
stopped transmitting. 
SPAM is reset. 

 

DSP TX NULL PDU 

DSP is transmitting too many NULL packets 
because it didn’t receive PDUs from CPU. 
SPAM is reset. 

 

EXC DSP RESET 

DSP SPAM has been reset more than four 
times within the last 20 minutes. 
Causes a system reset. 

 

EXCESS RESETS 

More than four resets have occurred within 
30 minutes. 
BRs permanently lock up and require a 
system reset. 

Reset system. 

EXT BR RESET 

BR received a reset command from the iSC. 
Event logged to indicate that BRs went 
down on iSC request. 

 

FAN1 ALARM 

Chassis FAN1 is malfunctioning. 

Check the chassis fans 
for proper operation. 

FAN2 ALARM 

Chassis FAN2 is malfunctioning. 

Check the chassis fans 
for proper operation. 

FFS PARTITION 

Board booted from wrong partition. 
May indicate problem with the files on boot 
partition. 

Verify software versions 
for each partition in 
System Manager. 

IDENRB LOSS 

Communication with the iDEN Radio Blade 
has been lost. 
The corresponding BR is locked and all 
associated RBs have stopped. 

 

LAPD LINK FAIL  

The LAPD connection between the BR and 
the iSC has been lost. 
The BR will try to re-establish the LAPD and 
sends a state change trap to iSC. 

Check the iSC 
connection. 

LOST RB 

DSP is not getting 1180 packets from the 
RB. 
APC logs the alarm and sends a message to 
the RIC to reset the RB. 

 

LOST RFU 

All the iDEN RBs and Datahosts in an RFU 
have been lost. 

Check the RFU 
connections, etc.  

MISC EVT/ALM