RadioFrame Networks Inc DH2 Manual De Usuario
RadioFrame System
Introduction
RFN_3.1 Beta
3
1.1.3 Reference
Documents
The following documents are intended to supplement the information contained
in this manual.
in this manual.
•
RF Planning Guidelines for iDEN Installations, RadioFrame Networks,
990-1001-00
990-1001-00
•
Customer Release Notes RFN_3.1, RadioFrame Networks,
P/N 991-1000-31
P/N 991-1000-31
•
Gen 3 Site Controller System Manual, Motorola, 68P80801E30-O
•
PECO II Rectifier System Manual: 127NHL-IBWS
•
PECO II System Manual 40-719010-1005
•
Battery Manufacturer’s Installation and Maintenance Documentation
•
Quality Standards—Fixed Network Equipment (FNE) Installation Manual
(R56), Motorola, R56 current edition
(R56), Motorola, R56 current edition
•
National Electrical Code (NEC), current edition
1.2 Quality
Standards
The installation section of this manual requires the Motorola Quality Standards-
Fixed Network Equipment (FNE) Installation Manual (R56) as a reference. The
R56 contains onsite installation, integration, optimization, and maintenance
information for trunked radio equipment. Technicians and installation personnel
must be familiar with procedures and guidelines presented within the R56
manual.
Fixed Network Equipment (FNE) Installation Manual (R56) as a reference. The
R56 contains onsite installation, integration, optimization, and maintenance
information for trunked radio equipment. Technicians and installation personnel
must be familiar with procedures and guidelines presented within the R56
manual.
1.3 Static Sensitive Precautions
Electrostatic discharge (ESD) can damage equipment and impair electrical
circuitry. It occurs when electronic printed circuit cards are improperly handled
and can result in complete or intermittent failures.
circuitry. It occurs when electronic printed circuit cards are improperly handled
and can result in complete or intermittent failures.
Extreme care must be taken while handling, shipping, and servicing boards and
RadioBlades. To avoid static damage, observe the following precautions:
RadioBlades. To avoid static damage, observe the following precautions:
•
Prior to handling, shipping, and servicing equipment, always put on a
conductive wrist strap connected to a grounding device. This discharges any
accumulated static charges. All RFN RadioBlades and Field Replaceable
Units (FRUs), including NPCs and APCs, are shipped with a disposable anti-
static wrist strap (RFN P/N 110-0610-00).
conductive wrist strap connected to a grounding device. This discharges any
accumulated static charges. All RFN RadioBlades and Field Replaceable
Units (FRUs), including NPCs and APCs, are shipped with a disposable anti-
static wrist strap (RFN P/N 110-0610-00).
Warning!
Use extreme caution when wearing a conductive wrist strap near sources of high
voltage. The low impedance provided by the wrist strap also increases the danger
of lethal shock should accidental contact with high voltage sources occur.
voltage. The low impedance provided by the wrist strap also increases the danger
of lethal shock should accidental contact with high voltage sources occur.