Honeywell International Inc. WFSADPT Manual De Usuario
20
PRELIMINARY: Notifier Wireless Sensor Network — P/N LS10036-000NF-E:N0 10/10/2013
FWSG
Configuration and Programming
7. Select the FWSG from the Communicator panel.
8. Click Assign.
The FWSG is now included in the list of devices with a profile assigned.
Removing Profile with PC Tools
To remove a profile in a FWSG using the PC Tools application, do the following:
1. Connect the W-USB dongle device to your computer. For more information on the USB
1. Connect the W-USB dongle device to your computer. For more information on the USB
2. Launch the PC Tools application. Refer Appendix B: "PC Tools" to know about launching the
PC Tools application.
3. Go to the Site Survey, Create Mesh Network, or Diagnostics step.
4. Click Extras and select Reset Devices. The Reset Devices screen appears, displaying the
4. Click Extras and select Reset Devices. The Reset Devices screen appears, displaying the
FWSG and other devices that have a profile assigned.
5. Click to select the FWSG and click Reset Device to remove the profile.
The profile is removed and the FWSG is reset to factory default state.