BodyMedia Inc. 155 Manual De Usuario

BodyMedia FIT Armband and Display Manual

BodyMedia FIT Armband and Display Manual

7

6

Removing the Armband strap from the Armband monitor
You will need to remove the Armband from its strap to upload data or to clean the 
Armband.

1. With the Armband logo facing upward, apply  
    continuous downward pressure to the right side 
    of the Armband Monitor until it separates from 
    the Armband strap.

2. To reattach to the strap, locate the USB port on the Armband, then align port 
    with the indentations on the left side of the strap.  Apply upward pressure to the 
    right side of the Armband until it snaps into place.

Armband Status Indicators
Power
When the Armband makes contact with your body, it will automatically power on.  
This may take up to 10 minutes.  Activation is indicated by a series of audio tones.  
Please note that there is no power button on the Armband.

Battery/Memory
Before first use, fully charge your Armband battery by removing the Armband strap 
and connecting the Armband to your computer with the included USB cable.  
Charging will take approximately three hours.  The Status lights will flash green 
when the Armband is fully charged. Model AB155 will function for 4-6 days before 
recharging is needed based upon individual usage.  The Model AB155 Armband  
can hold about 14 days of data.

 

To check if your Armband is ready to collect data, remove the Armband and press 
the Armband’s Status button.  The Status lights will indicate whether the Armband 
is ready to collect data: 

             •  Green (solid) = Armband is ready.
             •  Amber (slow flashing) = Less than 24 hours of battery life or memory  
                remain.  Plug in the Armband to charge and upload data.
             •  Red (fast flashing) = Armband is not able to collect data.    Plug in to  
                charge and upload data.