BenQ Mobile GmbH & Co. OHG E71A Manual De Usuario
Getting started
16
Ben
Q
2006, G
:\Mobil
\X85\E71_Obsi
di
an\fcc_vohe
r_die
se_m
ail
_le
sen\FM\OBSIDIAN_St
artup.fm
left page (16)
of E71 Obsidian, FCC, am, (09.08.2006, 15:35)
Te
m
m
p
lat
e: Minion
e: Minion
, 140x105 mm, Ve
rsi
o
o
n 1.6;
VAR Language: am;
VAR issue
date: 060714
Insert battery
Close battery cover
Place the battery cover on the phone
slightly off centre
Place the battery cover on the phone
slightly off centre
1
and then slide it
until it clicks into place
2
.
Remove battery cover
To remove the battery cover, lift it up
To remove the battery cover, lift it up
1
and slide it off the phone
2
.
Charging the battery
Charging
The battery is not fully charged when de-
livered. Plug the charger cable into the side
of the phone, plug the power supply unit
into a mains power socket and charge
for at least two hours (for charging
via USB, see page 86). Do not interrupt
the charging procedure prematurely.
livered. Plug the charger cable into the side
of the phone, plug the power supply unit
into a mains power socket and charge
for at least two hours (for charging
via USB, see page 86). Do not interrupt
the charging procedure prematurely.
à
Display when charging is in
progress.
progress.
Charging time
An empty battery is fully charged
after about 2 hours. Charging is only
possible within a temperature range of
+5 °C to +40 °C (+41°F to +104°F). If the
temperature rises/falls 5°C above/below
this, i.e drops to 32°F or rises to 113°F,
the charge symbol flashes a warning. The
mains voltage specified on the power
supply unit must not be exceeded.
after about 2 hours. Charging is only
possible within a temperature range of
+5 °C to +40 °C (+41°F to +104°F). If the
temperature rises/falls 5°C above/below
this, i.e drops to 32°F or rises to 113°F,
the charge symbol flashes a warning. The
mains voltage specified on the power
supply unit must not be exceeded.
1
2
6
5
7
1
2
1
2
Additional information
Please switch off your phone before
removing the battery!
3 volt SIM Cards are supported. Please
contact your service provider if you have a
different card.
Please switch off your phone before
removing the battery!
3 volt SIM Cards are supported. Please
contact your service provider if you have a
different card.