BenQ Mobile GmbH & Co. OHG S46 Manual De Usuario
12
6.11.01 S46 US DRAFT A31008-H5450-A5-*
Getting Started
Insert SIM card
The service provider may have sup-
plied you with a SIM card for GSM
mode on which all the important da-
ta of your number are stored.
plied you with a SIM card for GSM
mode on which all the important da-
ta of your number are stored.
If the SIM card has been delivered in
credit card size, snap the smaller
segment out and remove any rough
edges.
credit card size, snap the smaller
segment out and remove any rough
edges.
• Slide out the red SIM carrier
n
and twist the carrier in the direc-
tion indicated by the arrow
tion indicated by the arrow
o
.
n
o
p
r
G
• Insert SIM card in the carrier
p
.
Make sure the angled corner is in
the correct position, contacts
pointing in the right direction.
the correct position, contacts
pointing in the right direction.
• Twist SIM carrier until the SIM
card faces the phone
q
.
• Insert SIM carrier in the phone
until it clicks into place
r
.
Security/PIN
The SIM card can be protected against mis-
use with a 4 - 8 digit PIN (personal identifi-
cation number). Depending on the type of
your SIM card, the PIN can be changed or
the protection can be activated and deacti-
vated (p. 78).
The SIM card can be protected against mis-
use with a 4 - 8 digit PIN (personal identifi-
cation number). Depending on the type of
your SIM card, the PIN can be changed or
the protection can be activated and deacti-
vated (p. 78).
Type of the SIM card
Only 3-Volt SIM cards are supported. Older
SIM cards (5-Volt technology) cannot be
used. Please contact your service provider
if you have an older card.
Only 3-Volt SIM cards are supported. Older
SIM cards (5-Volt technology) cannot be
used. Please contact your service provider
if you have an older card.