BenQ Mobile GmbH & Co. OHG SXG75 Manual De Usuario

 of SXG75, FUG us-en, A31008-H8900-A1-1-7619 (07.10.2005, 13:11)

© Siemens AG 2003, E:\Auftrag\Siemens\Mob

ilePhones\FCCs\sxg75\FUG\WOLF5_Startup.fm

Template: X75, Version 2.2;VAR La

nguage:

 en;
 VAR issue date: 050902

Please observe the manufacturer's 

operating instructions that come 

with the RS MultiMediaCard.

• Press on the tray. The tray for the 

card is opened. You can remove 

the tray. 

• Insert the card on the tray (ensure 

that the chamfered corner is in the 

correct position 

1). Insert the tray 

with the card into the phone 2 

until it snaps in.

The battery is not fully charged 

when delivered. Plug the charger 

cable into the bottom of the phone, 

plug the power supply unit into a 

mains power socket and charge for 

at least two hours. 
Only use the plug-in power supply 

included in delivery!
As an alternative, the battery can 

be charged via the USB port 

Y

Display during charging.

An empty battery is fully charged af-

ter about 2 hours. Charging is only 

possible within a temperature range 

of +5 °C to 45 °C (41 °F to 113 °F). If 

the temperature rises/falls 5 °C (9 °F) 

above/below this, the charge symbol 

flashes a warning. The mains voltage 

specified on the power supply unit 

must not be exceeded. 
The charge level of the battery is 

only displayed correctly after an un-

interrupted charging/discharging 

cycle. You should therfore not remove 

and where 

Attention
Before removing the RS MultiMediaCard, 

carry out the 

 function in the set-

possible data loss.