Comba Telecom Ltd. MBDA-80 Manual De Usuario
USER MANUAL FOR MBDA-80
ENU STATUS : 1-0-0
Copyright - refer to title page
Page 35
It will reset PA and then re-detect the PA output power and reflected power, if they are normal, the PA
Service Status will turn to Normal, if PA output power or reflected power is still over the threshold, PA
Service Status will turn to Recovery again.
Service Status will turn to Normal, if PA output power or reflected power is still over the threshold, PA
Service Status will turn to Recovery again.
If PA output power or reflected power is still over the threshold after six times of PA Recovery, PA
Service status will be Shutdown which will need to be reset manually. Reset at Management > PA
Reset.
Service status will be Shutdown which will need to be reset manually. Reset at Management > PA
Reset.
Figure 31: RF Unit Detail Information
5.2.2
[COMMISSIONING]
A work flow of the commissioning process is shown on [Commissioning] Screen. Click the [Start] button,
the software will guide you through the commissioning step by step. For details, please refer to chapter
5.3.
the software will guide you through the commissioning step by step. For details, please refer to chapter
5.3.
Figure 32: [Commissioning] Screen
Click 800MHz to
check
check
Alarm information and
configuration table of
800MHz RFU
configuration table of
800MHz RFU
RF parameter setting
table of 800MHz RFU
table of 800MHz RFU