Comba Telecom Ltd. MBDA-EAWS Manual De Usuario
USER MANUAL FOR MBDA INDOOR SERIES
ENU STATUS : 1-0-1
Copyright - refer to title page
Page 18
3.3.3 ASSEMBLING
mBDA consists of one Rack and three different modules including PMU ,RFUs and CBs (CB is optional).
All the units are packed separately. Follow the steps below to assemble.
All the units are packed separately. Follow the steps below to assemble.
Figure 4: mBDA Screen
Note: PMU must be installed in the leftmost slot; RF Units are independent and can be installed in any of
the remaining six slots.
Figure 5: mBDA with 4 RFU and Combiners Configuration (example)
PMU must be installed in the leftmost slot. When assembling an mBDA system with DT Combiner and MT
Combiner modules, CBs and RFUs can be installed in any of the remaining six slots.
With typical configuration of quad band RFU plus two CB, we recommend inserting CBs and RFUs in the
order as shown in Figure 2 to have a better internal cabling. Starting from the left, the mBDA rack should
have PMU, DT Combiner (mBDA-CB-ABPK4ID1), the certified RFUs which can choose 700U MHz, 700L
MHz, 800MHz (ESMR) , 850MHz, 1900MHz, 2600MHz, AWS and EAWS and MT Combiner (mBDA-CB-
ABPK4ID2).
Combiner modules, CBs and RFUs can be installed in any of the remaining six slots.
With typical configuration of quad band RFU plus two CB, we recommend inserting CBs and RFUs in the
order as shown in Figure 2 to have a better internal cabling. Starting from the left, the mBDA rack should
have PMU, DT Combiner (mBDA-CB-ABPK4ID1), the certified RFUs which can choose 700U MHz, 700L
MHz, 800MHz (ESMR) , 850MHz, 1900MHz, 2600MHz, AWS and EAWS and MT Combiner (mBDA-CB-
ABPK4ID2).