Comba Telecom Ltd. RD-2020 Manual De Usuario
INSTALLATION GUIDE FOR RD-2020
RD-2020 CDMA QI
Copyright - refer to title page
Page 25
ENU Status : 1-0-0
4.3 WEB OMT
4.3.1 CONNECTION FROM PC TO EQUIPMENT
Before accessing to the OMT, physical connection between the OMT software and the equipment must be
made. A straight-through RJ45 cable shall be applied for the connection.
In order to access to equipment by IP protocol, the PC must be set with proper IP address, subnet mask
and gateway.
made. A straight-through RJ45 cable shall be applied for the connection.
In order to access to equipment by IP protocol, the PC must be set with proper IP address, subnet mask
and gateway.
Figure 14: PC Protocol Setting
The default IP address of repeater is 192.168.1.2, and default gateway is 192.168.1.1. To access the
repeater for the first time, the PC must be set with proper IP address: 192.168.1.X (X=3~254), subnet
mask: 255.255.255.0, gateway: 192.168.1.1.
After the PC protocol has been properly set, please execute the IE browser and type 192.168.1.2 in the
address bar. A pop-up window will be shown, requiring user name and password. The default user and
password are the same: admin.
Figure 15: Log in