RFNet Technologies Pte Ltd 000004 Manual De Usuario
3 CONNECTIONS
Auto MDI/MDIX LAN
port. It is to be connected
to PC via Ethernet cable
port. It is to be connected
to PC via Ethernet cable
Reset
switch to restore
the Router’s setting to
factory default setting
DC receptor for
power adaptor
power adaptor
Auto MDI/MDIX
WAN port. It is to be
connected to DSL or
cable modem via
Ethernet cable
WAN port. It is to be
connected to DSL or
cable modem via
Ethernet cable
4 LED
LAN Speed LED
Solid: LAN speed is
100Mbps
Nothing: LAN speed is
10Mbps
Solid: LAN speed is
100Mbps
Nothing: LAN speed is
10Mbps
WAN Speed LED
Solid: WAN speed
is 100Mbps
Nothing: WAN
speed is 10Mbps
Solid: WAN speed
is 100Mbps
Nothing: WAN
speed is 10Mbps
System LED
Solid: Indicates
system is ready
Blink: Indicates
system is still
rebooting
Solid: Indicates
system is ready
Blink: Indicates
system is still
rebooting
LAN LED
Solid: Indicates connection to
a Ethernet-enable computer
Blink: Indicates data
transmission
Solid: Indicates connection to
a Ethernet-enable computer
Blink: Indicates data
transmission
WLAN LED
Solid: Indicates wireless
segment is ready
Blink: Indicates data
transmission
Solid: Indicates wireless
segment is ready
Blink: Indicates data
transmission
WAN LED
Solid: Indicates connection
on the WAN port
Blink: Indicates data
transmission
Solid: Indicates connection
on the WAN port
Blink: Indicates data
transmission
Power LED
A solid light indicates
a proper connection
to the power supply
A solid light indicates
a proper connection
to the power supply
Note: For APRT-2518GS, there will be an additional LED below the WLAN LED. This additional LED
indicates the turbo g function. When the Router is in turbo g mode, the LED will light up.
indicates the turbo g function. When the Router is in turbo g mode, the LED will light up.
Page 7 of 45