Netgear 12200195 Manual De Usuario

To form a Powerline network you need at least two compatible Powerline devices (including 
the Powerline 500 WiFi Access Point).

For best performance, plan the location of your Powerline devices:

Use an electrical outlet that is not controlled by a wall switch to avoid someone 

unknowingly turning off the power to the outlet.

Do not plug in Powerline products to a power strip, extension cord, or surge protector as 

this might prevent them from working correctly or reduce the network performance.

Avoid plugging Powerline products into electrical outlets located near an appliance that 

uses a lot of power, such as a washer or dryer, or a refrigerator. This could potentially 
prevent the adapters from working correctly, or reduce network performance. 

Set Up the Powerline Network

You can set up a Powerline network that includes the Access Point, or you can add the Access 
Point to an existing Powerline network. 

Set Up a New Powerline Network

Different Powerline adapter models can share the network. All NETGEAR Powerline AV 
products (models XAV101, XAV1004, XAV2001, XAV2501, and XAVN2001) are compatible.



Make sure that your home router is up and running and that Ethernet wired connections 

are working.

Install the first Powerline adapter based on the 

installation instructions that came in the package. 

Plug a compatible NETGEAR Powerline adapter 
(sold separately) into a wall outlet near your 
router, and connect it to the LAN port on your 
router using an Ethernet cable. 

For convenience during setup, plug the Access 

Point into a wall outlet near your router.