Microsoft Corporation RM-2 Manual De Usuario
M e n u f u n c t i o n s
64
•
Delivery reports
to ask the network to send delivery reports about
your messages (network service).
•
Scale image down
to define the image size when you insert the
image into the multimedia message.
•
Default slide timing
to set the timing for slides in multimedia
messages.
•
Allow multimedia reception
. Select
No
,
Yes
or
In home network
to use
the multimedia service. If you select
In home network
, you cannot
receive multimedia messages outside your home network.
•
Incoming multimedia messages
. Select
Retrieve
to set the phone to
automatically fetch newly received multimedia messages, or select
Reject
if you do not wish to receive multimedia messages.
•
Connection settings
. Define connection settings for retrieving
multimedia messages. First select
Active multimedia settings
, and
activate the set in which you want to save the settings. Select
Edit
active multimedia settings
and edit the active settings.
Select each of the settings one by one and key in all the required
settings. Contact your network operator or service provider for the
settings.
settings. Contact your network operator or service provider for the
settings.
•
Allow adverts
. You can receive or reject messages identified as
advertisements. The setting is not shown if
Allow multimedia
reception
is set to
No
.
Settings for the e-mail application
You may receive the e-mail settings from the network operator or
service provider over-the-air based on OMA (Open Mobile Alliance)
provisioning. For more information about using the OMA provisioning,
contact your network operator or service provider.
service provider over-the-air based on OMA (Open Mobile Alliance)
provisioning. For more information about using the OMA provisioning,
contact your network operator or service provider.
When you have ordered the settings as an OMA message, remain in
standby mode and do not open the
standby mode and do not open the
E-mail
application until you have
received the settings.
When you have received the connection settings,
E-mail settings
received
is displayed. To save the settings immediately, select
Start
.
• To save the settings, select
Save
. Confirm the action by selecting
Yes
.
rm-2_en1_FCC.fm Page 64 Monday, February 16, 2004 8:14 AM