Microsoft Corporation RM-294 Manual De Usuario
Connectivity
Your device offers several options (network services) to
connect to the Internet, a corporate intranet, or to
another device or PC. Wireless methods include wireless
LAN, Bluetooth, and infrared. Your device supports a
wired solution with a USB (Universal Serial Bus) cable
connection for Nokia PC Suite. Your device also allows
you to communicate using net calls (Voice over IP),
instant messaging (chat), and modem-based
connections.
Packet data (GPRS)
GPRS (general packet radio service) enables wireless
access for mobile phones to data networks (network
service). GPRS uses packet data technology where
information is sent in short bursts of data over the
mobile network. The benefit of sending data in packets
is that the network is occupied only when sending or
receiving data. As GPRS uses the network efficiently, it
allows for quick data connection set-up and fast data
transmission speeds.
You must subscribe to the GPRS service. For availability
You must subscribe to the GPRS service. For availability
and subscription to GPRS, contact your network
operator or service provider.
Enhanced GPRS (EGPRS) is similar to GPRS, but it enables
Enhanced GPRS (EGPRS) is similar to GPRS, but it enables
faster connection. For more information on the
availability of EGPRS and data transfer speed, contact
your network operator or service provider. Note that
when you have selected GPRS as a data bearer, the
device uses EGPRS instead of GPRS if this is available in
the network.
During a voice call, you cannot establish a GPRS
During a voice call, you cannot establish a GPRS
connection, and any existing GPRS connection is put on
hold unless the network supports dual transfer mode.
Cable connection
Install the USB data cable driver to your PC before you
use a cable connection. You can use the
Data transfer
without installing the USB data cable drivers.
Select
Select
Menu
>
Connect.
>
Data cbl.
.
Using a USB data cable, you can connect your device to
a compatible PC . Connect the USB data cable to the
bottom of the device. To change the device type you
normally connect to your device with the data cable,
press the scroll key.
Select from the following:
•
Select from the following:
•
Ask on connection
— Select whether you want to be
asked for the device type every time you connect the
data cable to your device.
•
PC Suite
— Connect the PC Suite to your device with
the data cable, and use your device as a modem.
•
Data transfer
— Access and transfer data such as
music or image files from your computer using the
data cable connection. To use the
Data transfer
mode, make sure that you have not selected USB as
a connection type in the Manage connections
50
Con
nectivity
file:///C:/USERS/MODEServer/lkatajis/13055716/rm-227_slender/en/issue_1/rm-227_slender_en-US_1.xml
Page 50
Dec 20, 2006 9:03:12 AM