Check Point Software technologies Ltd 67897 Manual De Usuario
Page 52
Back Panel
Wireless Network + ADSL Model
Key
Item
Description
1 ANT1
and
ANT2
Ports for attaching wireless network antennas.
(Only in Wireless Network and Wireless Network
+ ADSL models)
(Only in Wireless Network and Wireless Network
+ ADSL models)
2
Power outlet
Connects to the power supply unit's cable.
3 Reboot
button
Lets you forcibly reboot the appliance. The
button is recessed into the appliance chassis to
prevent accidental reboot. The appliance reboots
immediately after you press the button.
prevent accidental reboot. The appliance reboots
immediately after you press the button.
4
LAN1 - LAN8 ports Built in Ethernet ports.
LAN2/SYNC port
In a cluster configuration, you must connect a
cable between this port on both appliances that
take part in the cluster. You can configure the
cluster sync port to a port other than LAN2.
cable between this port on both appliances that
take part in the cluster. You can configure the
cluster sync port to a port other than LAN2.
5
DMZ and WAN ports Built in Ethernet ports.
6
USB2 port
Second USB port. Same functionality as the
USB1 port on the Front Panel.
USB1 port on the Front Panel.
7 Console
port
Serial connection configured in 115200 bps. You
can also use this port to connect an analog
modem.
can also use this port to connect an analog
modem.
CP_1100Appliance_GettingStartedG52 52
CP_1100Appliance_GettingStartedG52 52
25/02/2013 10:05:30
25/02/2013 10:05:30