Opticon Sensors Europe BV H22-RFID Manual De Usuario
22
22
1.8.3.
Removing the Battery
Remove the battery by following the steps below:
Figure 14. Remove the Battery
1.8.4.
Locking the Battery Cover
Before you can power the device on, you must lock the battery cover by performing the following
procedure.
Figure 15. Lock the Battery Cover
Step 1:
Remove the battery cover.
See “Removing the Battery
Cover
See “Removing the Battery
Cover
” for details.
Step 2:
Slide the battery out (A) and up
(B). See Fig. 14.
(B). See Fig. 14.
Step 1:
Lock the battery cover by
turning the two battery
cover screws clockwise.
See Fig. 15.
turning the two battery
cover screws clockwise.
See Fig. 15.