Opticon Sensors Europe BV OPL9813 Manual De Usuario
Opticon
OPL 9813
Preliminary Specifications Manual
21
12. Durability
12.1. Drop Test (without packaging)
No malfunction occurred after the following drop test.
Drop Test: Drop the data collector from a height of 150 cm onto a concrete floor. Each
side of the data collector impacted the floor three times.
side of the data collector impacted the floor three times.
Figure 11: Drop test
12.2. Dust and Drip Proof
IEC IP54
Dust Prevention
Level
Details
5
Ingress of dust is not entirely prevented, but it must not enter in sufficient quantity to interfere
with the satisfactory operation of the equipment; complete protection against contact.
with the satisfactory operation of the equipment; complete protection against contact.
Water Prevention
Level
Details
4
Water splashing against the enclosure from any direction shall have no harmful effect.
13. Reliability
MTBF (Mean Time Between Failures) of this product is 10,000 hours.
14. Regulatory Compliance
14.1. Laser Safety
The data collector emits laser beams.
JIS C6802: 2005: Laser class 2
IEC 825-1/EN 60825-1: Laser class 2
FDA CDRH Laser class II. Complies with 21 CFR 1040.10 and 1040.11 except for
deviations pursuant to laser notice No. 50 dated June 24, 2007.
deviations pursuant to laser notice No. 50 dated June 24, 2007.
Class II laser devices are not considered to be hazardous when used for their
intended purpose. Avoid staring into the laser beam.
intended purpose. Avoid staring into the laser beam.