AeroScout BS2035-0 Manual De Usuario
Installing the Exciter | 9
4. Position the Exciter in the site according to site survey recommendations,
and mount it.
5. Align the Exciters’ positions according to the required area coverage.
6. Configure the Exciter’s settings. The following are the Exciter’s
configurable parameters:
Name
ID
IP address
Port
Coordinates of its location
Transmission range: up to 6m
Transmission Interval: the interval between two
consecutive messages transmitted by the
Exciter (10msec – 1000msec).
consecutive messages transmitted by the
Exciter (10msec – 1000msec).
Exciter events define the required tag response
after they are triggered by the Exciter:
after they are triggered by the Exciter:
Send Exciter ID
Send Exciter ID and change tag transmission mode
Send Exciter ID and send a data message
Send Exciter ID and send a data message
Send Exciter ID, store a data message and send it.
Send Exciter ID and send one of the data messages stored on
the tag.
Activate tag
Deactivate tag
Note
The configuration process is explained in detail in the AeroScout Engine User’s
Manual (version 2.4 and above).
The configuration process is explained in detail in the AeroScout Engine User’s
Manual (version 2.4 and above).
Mounting the Exciter
Mounting the Exciter on a Wall
The Exciter can be mounted on a wall using the wall mounting kit (provided
with the Exciter). The wall mounting kit includes four fastening ear lugs that
can be connected to the four corners of the Exciter housing as shown in
Figure 7.
with the Exciter). The wall mounting kit includes four fastening ear lugs that
can be connected to the four corners of the Exciter housing as shown in
Figure 7.