Radwin Ltd. WL1000F49 Manual De Usuario
Chapter 5 Diagnostics and Troubleshooting
WinLink 1000 Installation and Operation Manual
3. Click OK to activate a loopback.
WinLink 1000 activates selected loopback. A loopback status
arrow in the Main menu turns green to indicate an active
loopback.
arrow in the Main menu turns green to indicate an active
loopback.
Î
To deactivate a loopback:
•
•
From the From the Local or Remote drop-down box of the
Loopbacks dialog box, select None and click OK.
Loopbacks dialog box, select None and click OK.
A loopback is deactivated and the corresponding status arrow in
the Main menu becomes dimmed.
the Main menu becomes dimmed.
Figure 5-2. Loopbacks Dialog Box
Local External Loopback
Local WinLink 1000 can be set to an external loopback to test the local
E1/T1 port and its connection to the local side user equipment. In this
mode, data coming from the local user equipment is looped back to it
(see
E1/T1 port and its connection to the local side user equipment. In this
mode, data coming from the local user equipment is looped back to it
(see
). This loopback is initiated from a management station
connected to the local unit.
5-4
Running Diagnostic Loopbacks