G-Tek Electronics Corporation PWG Manual De Usuario
VoIP settings
The VoIP settings are provided to set up the VoIP param- eters.
General settings
These settings provide the basic setup for VoIP mode.
Press Menu/Select and select Settings, VoIP, and Gen-
eral to configure these settings as follows:
Press Menu/Select and select Settings, VoIP, and Gen-
eral to configure these settings as follows:
• VoIP On/Off: enables or disables VoIP mode.
• Stun Server: specifies the Stun server for VoIP
• Stun Server: specifies the Stun server for VoIP
mode. Key in the server name using the keypad. See
“Entering text” on page 23.
“Entering text” on page 23.
• Speaker Volume: Adjusts the speaker volume in
VoIP mode. Choose from Level 1 through Level 10.
• Microphone Volume: Adjusts the microphone vol-
ume in VoIP mode. Choose from Level 1 through
Level 10.
Level 10.
• Preferred Codec: specifies the codec to be used for
VoIP calls. Select from GSM, a Law, H Law, G726,
G729, and G723.1.
G729, and G723.1.
Call control
The call control options set up the call waiting, call bar- ring,
call forwarding, caller ID, DTMF, and prefix dialing options for
the phone. See “Call options” on page 32 for details about
these options.
call forwarding, caller ID, DTMF, and prefix dialing options for
the phone. See “Call options” on page 32 for details about
these options.
Profiles
The PWG-500 provides ten default profiles for the VoIP mode.
Select a profile and press Activate to make the selected
profile active. Press Personalize to change the profile settings.
Press Edit Profile Name to change the profile name.
Select a profile and press Activate to make the selected
profile active. Press Personalize to change the profile settings.
Press Edit Profile Name to change the profile name.
VoIP settings ---
49
49