CipherLab Co. Ltd. 1661 Manual De Usuario
3
Update
錯誤
! 使用 [常用] 索引標籤將 Heading 1 套用到您想要在此處顯示的文字。
CHARGING THE BATTERY FOR 1661
The battery may not be charged to full for shipment. When you first receive the package,
you will need to charge the battery to full before using the scanner. For 1661, use the
Direct USB cable to connect the scanner to PC for charging.
you will need to charge the battery to full before using the scanner. For 1661, use the
Direct USB cable to connect the scanner to PC for charging.
Note: Battery charging stops when the temperature drops below 0°C or exceeds 40°C. It
is recommended to charge the battery at room temperature (18°C to 25°C) for
optimal performance. It takes approximately 4 hours to charge the battery to full.
optimal performance. It takes approximately 4 hours to charge the battery to full.
1) Install the battery to 1661.
2) Connect 1661 to your computer or notebook via the USB cable.
3) The scanner LED will be flashing red during charging.
2) Connect 1661 to your computer or notebook via the USB cable.
3) The scanner LED will be flashing red during charging.
When the charging is done, the LED will turn off.
When charging error occurs, the LED will turn solid red.