CipherLab Co. Ltd. 1862 Manual De Usuario

124

1800 Series Handheld RFID Reader

Reference Manual

5.1 OUTPUT FORMAT

Before transmitting data captured by the reader you can edit, add and re-order the

sequence of the final transmitted data. There are standard formats for the specified
interfaces described below.

BT SPP/USB VCOM via 3610

The output formats for Bluetooth

SPP/USB VCOM via 3610 can be one of Packet Data,

Hexadecimal and Raw Data. The default value is Packet Data.

BT HID/USB HID via 3610

The output formats for Bluetooth

HID/USB HID via 3610 can be one of Hexadecimal and

Raw Data. The default value is Hexadecimal.

Note: Bluetooth

HID or USB HID via 3610 interface does not support Packet Data as an

output format.

Command:

#@dat_fmt?\r

Purpose

Get Current Output Data Format

Response

OK,[m]\r (Default m=

‘0’

)

[m]: Output Data Format

[m]

BT SPP / USB VCOM via 3610

BT HID / USB HID via 3610

‘0’

Packet Data

‘1’ Hexadecimal

Hexadecimal

‘2’ Raw

Data

Raw Data

ERR,[code]\r

#@dat_fmt=[m]\r

Purpose

Set New Output Data Format

Response OK\r

ERR,[code]\r

Example:

Packet Data:

In order to enhance data reliability during transmission, header and checksum are added
before transmitting. This is normally used for terminal application programming. Please

note that Packet data does not allow any editing features.