CipherLab Co. Ltd. 1862 Manual De Usuario
124
1800 Series Handheld RFID Reader
Reference Manual
5.1 OUTPUT FORMAT
Before transmitting data captured by the reader you can edit, add and re-order the
sequence of the final transmitted data. There are standard formats for the specified
interfaces described below.
interfaces described below.
BT SPP/USB VCOM via 3610
The output formats for Bluetooth
®
SPP/USB VCOM via 3610 can be one of Packet Data,
Hexadecimal and Raw Data. The default value is Packet Data.
BT HID/USB HID via 3610
The output formats for Bluetooth
®
HID/USB HID via 3610 can be one of Hexadecimal and
Raw Data. The default value is Hexadecimal.
Note: Bluetooth
®
HID or USB HID via 3610 interface does not support Packet Data as an
output format.
Command:
#@dat_fmt?\r
Purpose
Get Current Output Data Format
Response
OK,[m]\r (Default m=
‘0’
)
[m]: Output Data Format
[m]
BT SPP / USB VCOM via 3610
BT HID / USB HID via 3610
‘0’
Packet Data
‘1’ Hexadecimal
Hexadecimal
‘2’ Raw
Data
Raw Data
ERR,[code]\r
#@dat_fmt=[m]\r
Purpose
Set New Output Data Format
Response OK\r
ERR,[code]\r
Example:
Packet Data:
In order to enhance data reliability during transmission, header and checksum are added
before transmitting. This is normally used for terminal application programming. Please
before transmitting. This is normally used for terminal application programming. Please
note that Packet data does not allow any editing features.