CipherLab Co. Ltd. 3656CRADLE Manual De Usuario
74
Enter Setup
1560/1562 Series Barcode Scanner
User Guide
2.
2.
2.
2.3
3
3
3.2 INTER
.2 INTER
.2 INTER
.2 INTER----FUNCTION DELAY
FUNCTION DELAY
FUNCTION DELAY
FUNCTION DELAY
By default, the inter-function delay is set to zero. Specify a value, ranging from 0 to 254
in units of millisecond, to match the computer response time of the keyboard interface.
Such delay time is inserted between every function code (0x01 ~ 0x1F) being
transmitted. The longer the delay time is, the slower the transmission speed will be.
in units of millisecond, to match the computer response time of the keyboard interface.
Such delay time is inserted between every function code (0x01 ~ 0x1F) being
transmitted. The longer the delay time is, the slower the transmission speed will be.
Inter-Function
Delay… (*0~254)
1)
Read the barcode above to specify the inter-function delay.
2)
Read the “
Decimal Value
” barcode on page 241 for the desired inter-function delay
(millisecond).
3)
Read the “Validate” barcode on the same page to complete this setting.
2.
2.
2.
2.3
3
3
3.3 ACK/NAK TIMEOUT
.3 ACK/NAK TIMEOUT
.3 ACK/NAK TIMEOUT
.3 ACK/NAK TIMEOUT
By default, the scanner sends data to the host without waiting for an ACK/NAK response
before sending more data. Specify a value, ranging from 1 to 99 in units of 0.1 second. If
no response within the specified period of time, the scanner will attempt to send the
same data two more times. If all three attempts fail without any notification, data loss
will occur.
before sending more data. Specify a value, ranging from 1 to 99 in units of 0.1 second. If
no response within the specified period of time, the scanner will attempt to send the
same data two more times. If all three attempts fail without any notification, data loss
will occur.
ACK/NAK Time-out
after … (*0~99)
1)
Read the barcode above to specify the time interval for the scanner to send data and
wait for a response from the host.
2)
Read the “
Decimal Value
” barcode on page 241. For example, read “1” and “0” for the
scanner to automatically shut down after idleness of 1 second.
3)
Read the “Validate” barcode on the same page to complete this setting.