CipherLab Co. Ltd. 8260 Manual De Usuario
21
Chapter 1
錯誤! 使用 [常用] 索引標籤將 Heading 1 套用到您想要在此處顯示的文字。
1.7 CHARGING & COMMUNICATIONS
Normally, the mobile computer ships with a USB cable for charging and communications.
USB Interface Cable
Task
USB Cable
Charging
USB direct charging
500 mA: USB icon
100 mA: Highlighted USB icon
0 mA: Disable charging for 8200
5 V charging from the adaptor (Plug icon)
Communications USB Virtual COM — If using FORGE Application Generator software, you
may use a download utility to receive data on your computer; otherwise,
run HyperTerminal.exe to receive data directly.
run HyperTerminal.exe to receive data directly.
USB HID — Run a text editor on your computer to receive data directly.
USB Virtual COM_CDC — If using FORGE Application Generator software,
you may use a download utility to receive data on your computer;
otherwise, run HyperTerminal.exe to receive data directly.
otherwise, run HyperTerminal.exe to receive data directly.
Note: (1) If you are using USB Virtual COM for the first time, you must install its driver
from the CD-ROM. Driver version 5.3 or later is required. Please remove older
versions! The virtual COM port will not be assigned until the USB port is in use.
(2) If you are using USB Virtual COM_CDC for the first time, you must install its
(2) If you are using USB Virtual COM_CDC for the first time, you must install its
driver from the CD-ROM. USB CDC driver installer is available in the “Windows”
folder, which will copy a vendor-supplied INF file to Windows.
folder, which will copy a vendor-supplied INF file to Windows.
(3) For Standard USB cable, it will release COM port in the following conditions: (i)
detach the cable from the mobile computer directly。
detach the cable from the mobile computer directly。