CipherLab Co. Ltd. 9600 Manual De Usuario
74
9600 Mobile Computer
Reference Manual
Aggressive Scan
Aggressive scanning complements and works in conjunction with the
standard scanning that is configured through the Roam Trigger, Roam
Delta, and Roam Period settings. It is recommended that aggressive
scanning is enabled unless there is significant co-channel interference
because of overlapping coverage from APs that are on the same channel.
Value: On, Off
Default: On
CCX features
Whether to allow the use of three CCX features (AP-assisted roaming,
AP-specified maximum transmit power, and radio management) —
AP-specified maximum transmit power, and radio management) —
Value: On, Off (Use “On” only when Cisco-only APs are in use)
Default: Optimized
WMM
Whether to allow the use of Wi-Fi Multimedia Extensions (WME) or not —
Value: On, Off
Default: Off
Auth Server
Type of authentication server being used for EAP authentication —
Value:
Type 1
Cisco Secure ACS or another server that
uses PEAPv1 for PEAP with EAP-MSCHAPV2
(PEAP-MSCHAP)
Type 2
A different authentication server, such as
Juniper Networks Steel Belted RADIUS, that
uses PEAPv0 for PEAP-MSCHAP
uses PEAPv0 for PEAP-MSCHAP
Default: Type 1
TX Diversity
How to handle antenna diversity when transmitting data to AP —
Value:
Main Only
Use main antenna only
Aux Only
Use auxiliary antenna only
On
Use diversity
Default: On
RX Diversity
How to handle antenna diversity when receiving data from AP —
Value:
Main Only
Use main antenna only
Aux Only
Use auxiliary antenna only
On-start on Main
On startup, use main antenna
On-start on Aux
On startup, use auxiliary antenna
Default: On-start on Main
Frag Thresh
If packet size exceeds threshold, then it is fragmented —
Value: 256 ~ 2346
Default: 2346 (bytes)
RTS Thresh
Packet size above which RTS/CTS is required on link —
Value: 0 ~ 2347