HydroPoint data systems inc. WT008 Manual De Usuario

Turn the Upper Line dial to the next position.

Note that the cursor has moved to the “7,” which can now be
changed.

Turn the Lower Line dial to change the number.

Repeat these steps until you have set your desired precipitation
rate.

Set Efficiency
1.

Turn the Upper Line dial until you see:

Note that there is a cursor under the “6” to indicate this digit can
be changed.

Turn the Lower Line dial to choose one of the following System
Efficiency settings:

•

1 to 9 (default depends on sprinkler type selected
previously).

Turn the Upper Line dial to the next position.

Note that the cursor has moved to the “5,” which can now be
changed.

EFFIC'NCY Digit 2 STA 01

65 Percent (default)

–

EFFIC'NCY Digit 1 STA 01

65 Percent (default)

–

PRECIP Digit 2 STA 01

1.70 Inches/Hr (default)

–

Programming Your WeatherTRAK ET Plus

Turn the Lower Line dial to choose:

•

Yes (end time number), or default

•

No.

Set Sprinkler Type
1.

Turn the Upper Line dial until you see:

The lower line of the display shows the default setting.

Turn the Lower Line dial to choose one of the following
sprinkler types:

•

Spray Head (Default Setting),

•

Full Circle Rotor,

•

Part Circle Rotor,

•

Mixed Rotors,

•

Full Circle Impact,

•

Part Circle Impact,

•

Mixed Impacts,

•

Stream Rotors,

•

Bubbler,

•

Drip Emitter, or

•

Stream Spray.

Set Precipitation Rate
1.

Turn the Upper Line dial until you see:

Note:

This setting should match the precipitation rate that you

gathered using the Precipitation Rate Work Sheet.

Turn the Lower Line dial to choose one of the following
precipitation rates:

•

0 to 9.

PRECIP Digit 2 STA 01

1.70 Inches/Hr (default)

–

WATER DAY INTERVAL SCH A

01 Day (water everyday)

Programming Your WeatherTRAK ET Plus