ViVOtech Inc. VPS500A Manual De Usuario
ViVOpay OEM S500 Technical Reference
Document: 740‐0005‐00 Rev. 1.0
3
Proprietary & Confidential
Product Overview
The ViVOpay OEM S500 Vending Reader (the Reader) is an electronic module capable of
communicating with ISO 14443 Type A and Type B compatible cards and tags using Radio
Frequency (RF). Data stored on the cards and tags is read by the Reader and transmitted
to a host. This section provides general information about the Reader. Refer to Appendix
A, B, and C for technical details.
communicating with ISO 14443 Type A and Type B compatible cards and tags using Radio
Frequency (RF). Data stored on the cards and tags is read by the Reader and transmitted
to a host. This section provides general information about the Reader. Refer to Appendix
A, B, and C for technical details.
Overview
The Reader consists of a set of printed circuit boards consisting of a Control PCA and
an Antenna PCA. The two circuit boards together contain all circuitry required to
communicate with between the host and RFID cards and tags. An optional Interface
PCA may be connected to the Control PCA to add additional Reader to Host
configurations. All circuit boards are designed to be assembled as a single module
for simple mounting, or they may be separated to accommodate space constraints.
Type A & B cards and tags do not contain internal power and are activated by the RF
power transmitted by the Reader. When a card or tag is positioned close to the
antenna the card/tag is powered and activated, and it transmits its data as a
modulated RF signal to the RF receiver. The RF receiver demodulates the signal and
sends the demodulated tag data to the microcontroller. The microcontroller collects
the tag data, decrypts it (if required), and transmits it to the host terminal. The LEDs
and beeper indicate when a tag has been read successfully.
an Antenna PCA. The two circuit boards together contain all circuitry required to
communicate with between the host and RFID cards and tags. An optional Interface
PCA may be connected to the Control PCA to add additional Reader to Host
configurations. All circuit boards are designed to be assembled as a single module
for simple mounting, or they may be separated to accommodate space constraints.
Type A & B cards and tags do not contain internal power and are activated by the RF
power transmitted by the Reader. When a card or tag is positioned close to the
antenna the card/tag is powered and activated, and it transmits its data as a
modulated RF signal to the RF receiver. The RF receiver demodulates the signal and
sends the demodulated tag data to the microcontroller. The microcontroller collects
the tag data, decrypts it (if required), and transmits it to the host terminal. The LEDs
and beeper indicate when a tag has been read successfully.
Features
•
Read of ISO 14443 Type A & Type B cards and tags.
•
ARM LPC2124 32‐bit Microcontroller.
•
Crypto data processing for contactless Smartcards (optional).
•
RS‐232 (9600, 19200, 38,400, 57,600 baud)
•
Magnetic Stripe Card and Magnetic Stripe Card Reader emulation.
•
Horizontal (4) or Vertical (3) LED indicators, or external LED drive.
• Beeper or external beeper drive.
• Field replaceable firmware.
• Compact packaging fits in the space of a typical Card Reader or Bill Collector.
• Expandable interface for use with custom Interface PCAs.