Shenzhen Kirisun Communications Co. Ltd. TP620 Manual De Usuario

SAFETYTRAININGINFORMATION

Your

radio generators RF electromagnetic energy during

transmit mode.This radio is designed for and classified as“Occupational Use Only”,meaning it must be used only during the

course of employment by individuals aware of the hazards,and the ways To Minimize Such hazards. This radio is NOT intended

for use by the“General Population” in an uncontrolled environment. This radio has been tested and complies with the FCC RF

exposure limits for“Occupational Use Only”.Inaddition, your

radio complies with

the following Standards and Guidelines with regard to RF energy and electromagnetic energy levels and evaluation of such

levels for exposure to humans:

�

to Radio Frequency Electromagnetic Fields.

�

American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to Human

Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.

�

American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement of

Potentially Hazardous Electromagnetic Fields– RF and Microwave.

�

The following accessories are authorized for use with this product. Use of accessories other than those (listed in the

instruction) specified may result in RF exposure levels exceed the FCC requirements for wireless RF exposure.

To ensure you’re your expose to RF electromagnetic energy is within the FCC allowable limits for occupational use, always

adhere to the following guidelines

he information listed above provides the user with the information needed to make him or her aware of RF exposure,

and what to do to as‐sure that this radio operates with the FCC RF exposure limits of this radio.

Electromagnetic Interference/Compatibility

During transmissions,

radio generates RF energy that can possibly cause interference

with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so. DO NOT

operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites.

Occupational/Controlled Use

The radio transmitter is used in situations in which persons are exposed as consequence of their employment provided

those persons are fully aware of the potential for exposure and can exercise control over their exposure.

FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure

Attention:

This radio complieswith IEEE and ICNIRP exposure limits for occupational/controlled RF exposure

emvironment at operating duty factors of up to 50% and is authorized by the FCC for occupational

use only. An appropriate warning lable is affixed to all units.

In order to comply with RF exposure requirements, a minimum distance of 2.5cm must be maintained

when held-to-face, and body-worn operations are restricted to the approved original acessories (belt clip).

Do not use this device when antenna shows obvious damages

Kirisun Communications Co., Ltd