KROHNE FMCW06G10 Manual De Usuario

 ELECTRICAL CONNECTIONS 

4

23

OPTIWAVE 1010

www.krohne.com

09/2014 - 4003537401 - MA OPTIWAVE 1010 R01 en

4.1  Safety instructions

4.2  Electrical installation: 2-wire, loop-powered

DANGER!
All work on the electrical connections may only be carried out with the power disconnected. Take 
note of the voltage data on the nameplate!

DANGER!
Observe the national regulations for electrical installations!

DANGER!
For devices used in hazardous areas, additional safety notes apply; please refer to the Ex 
documentation.

WARNING!
Observe without fail the local occupational health and safety regulations. Any work done on the 
electrical components of the measuring device may only be carried out by properly trained 
specialists. 

INFORMATION!
Look at the device nameplate to ensure that the device is delivered according to your order. 
Check for the correct supply voltage printed on the nameplate.

Figure 4-1: Terminals for electrical installation

1  Grounding terminal in the housing (if the electrical cable is shielded)
2  Current output -
3  Current output +

INFORMATION!
Electrical power to the output terminal energizes the device. The output terminal is also used for 
HART

 communication.

CAUTION!
Use the applicable electrical cables with the cable glands.