KROHNE FMCW06G10 Manual De Usuario
6
OPERATION
36
OPTIWAVE 1010
www.krohne.com
09/2014 - 4003537401 - MA OPTIWAVE 1010 R01 en
6.4.5 Signal output
Use the "signal output" pane to specifiy the type of data that the current output must supply. The
supervisor can set the measurement function (e.g. level, distance etc.), the output range, the
error delay, minimum distance (NO) and maximum distance (ND).
supervisor can set the measurement function (e.g. level, distance etc.), the output range, the
error delay, minimum distance (NO) and maximum distance (ND).
6.4.6 Import / export
You can use the import /export function to do 2 procedures:
• Import device configuration data in a CFG file. You can then transmit the data to the device
(Store to device).
• Export device configuration data (parameters etc.) in a CFG file. You can use this data for the
configuration of other devices.
INFORMATION!
Minimum distance (NO) and maximum distance (ND) is also given in the "basic parameter"
menu.
Minimum distance (NO) and maximum distance (ND) is also given in the "basic parameter"
menu.
Figure 6-10: Signal output menu
INFORMATION!
You can save measurement data in a DAT file when you use the "Record" function in the Analysis
Values menu. For more data, refer to the "Analysis values" section.
You can save measurement data in a DAT file when you use the "Record" function in the Analysis
Values menu. For more data, refer to the "Analysis values" section.