ICP DAS Co. Ltd. 3SDSST-24M Manual De Usuario

 

1. To comply with FCC RF exposure compliance requirements, a separation distance of 

at least 20 cm must be maintained between the antenna of this device and all 

persons. 

2. This Transmitter must not be co-located or operating in conjunction with any other 

antenna or transmitter   

 

This device is intended only for OEM integrators under the following conditions: 

 

1)    The antenna must be installed such that 20 cm is maintained between the antenna 

and users.    For laptop installations, the antenna must be installed to ensure that the 

proper spacing is maintained in the event the users places the device in their lap 

during use (i.e. positioning of antennas must be placed in the upper portion of the 

LCD panel only to ensure 20 cm will be maintained if the user places the device in 

their lap for use) and 

2)    The transmitter module may not be co-located with any other transmitter or antenna.   

As long as the 2 conditions above are met, further transmitter testing will not be 

required.    However, the OEM integrator is still responsible for testing their 

end-product for any additional compliance requirements required with this module 

installed (for example, digital device emissions, PC peripheral requirements, etc.). 

 

IMPORTANT NOTE:    In the event that these conditions can not be met   (for example 

certain laptop configurations or co-location with another transmitter), then the FCC 

authorization is no longer considered valid and the FCC ID can not be used on the final 

product.    In these circumstances, the OEM integrator will be responsible for 

re-evaluating the end product (including the transmitter) and obtaining a separate FCC 

authorization.