Chung Nam Electronics Co. Ltd. WLANTPBG Manual De Usuario

- 8 - 

The Wireless Adapter can be configured by Wireless Client Utility (WCU). This chapter 

describes how to configure your Wireless Adapter for wireless connectivity on your 

Wireless Local Area Network (WLAN) and use the data security encryption features. 

After Installing the Adapter, the Adapter’s tray icon 

  will appear in your system tray. It 

appears at the bottom of the screen, and shows the signal strength using color and the 

received signal strength indication (RSSI).   

 

If 

the icon is gray, there is no connection. 

  If the icon is red, there is poor signal strength and the RSSI is less than 5dB. 

  If the icon is yellow, there is poor signal strength and the RSSI is between 5dB and 

10dB. 

  If the icon is green, there is good signal strength and the RSSI is between 10dB 

and 20dB. 

  If the icon is green, there is excellent signal strength and the RSSI is more than 

20dB. 

Double-click the icon and the WCU utility will run. You can also run the utility by clicking 

the  Start>Program>Wireless>Wireless Client Utility. The WCU utility provides a 

complete and easy to use set of tools to: 

¾ 

Display current status information 

¾ 

Edit and add configuration profiles 

¾ 

Display current diagnostics information 

The section below introduces these above capabilities. 

The Current Status tab contains general information about the program and its operations. 

The Current Status tab does not require any configurations.