ZTE Corporation ZTEMF68 Manual De Usuario
MF68
16
2.5 Getting started
Make sure you follow the operation procedure before using the Mobile Cam.
l
l
Insert a 3G SIM/USIM card.
l
The battery should be fully charged before you use the Mobile Cam, otherwise the
Mobile Cam may not function correctly.
l
Set date and time. See details in Section 4.2.
2.5.1 SIM/USIM card
Be sure to insert a 3G SIM/USIM card before you use the Mobile Cam.
Note:
u A SIM/USIM card set with PIN code cannot be used normally in the Mobile Cam. You
Note:
u A SIM/USIM card set with PIN code cannot be used normally in the Mobile Cam. You
need to use another mobile phone to unlock the PIN code of the SIM/USIM card
before using it in the Mobile Cam.
u Make sure to disconnect the charger and switch off your Mobile Cam before inserting
or removing your SIM/USIM card.
u Inserting SIM/USIM card.
1. Make sure your charger is disconnected, then press and hold down the power key
until the Mobile Cam is powered off.
2. Pull out the plastic plug covering the SIM/USIM card slot.
3. Insert the SIM/USIM card, with the metal surface facing downward and the bevel