ZTE Corporation ZXG-BTS2 Manual De Usuario
ZXG10-BTS (V2.9) Technical Manual
88
Confidential and Proprietary Information of ZTE CORPORATION
F
I G U R E
7 0
A
L A R M
R
E P O R T I N G
F
L O W
BSC
CMM
FUC
CHP
CIP
Fan/AEM/PA Alarm
Backbone
Node Alarm
The CIP software collects the alarms of itself and the fan/AEM/PA alarms,
and then reports them to the FUC software. The CHP software collects the
and then reports them to the FUC software. The CHP software collects the
alarms of itself and reports them to the FUC software. The FUC software
reports the collected alarms and its own alarms to the CMM software. The
reports the collected alarms and its own alarms to the CMM software. The
alarms of the backbone nodes are collected by the CMM software, which
reports all alarms of this site to BSC through LapD, and implements some
reports all alarms of this site to BSC through LapD, and implements some
relevant alarm processing, such as power amplification shut-down.
Online Software Loading
It supports the BTS software online loading by the BSC.
The software loading flow is shown in Figure 71.
F
I G U R E
7 1
S
O F T W A R E
L
O A D I N G
F
L O W
CMM
FUC
CHP
CIP
All software versions are downloaded into the CMM’s FLASH memory
through the BSC. The CMM validates the versions, and loads the software
to the FUC when it finds any difference with the TRM software.