Marasst Incorporation 03010 Manual De Usuario
14
Recharging the Batteries
To recharge the receiver or transmitter batteries simply plug the unit into
one of the included power adapters as shown in the diagram below. The
two chargers that came with your Guardian Angel are interchangeable –
either one can be used with the receiver or transmitter.
one of the included power adapters as shown in the diagram below. The
two chargers that came with your Guardian Angel are interchangeable –
either one can be used with the receiver or transmitter.
The power adapter will simultaneously charge the battery and supply
power to the unit so it can be used while the batteries recharge.
power to the unit so it can be used while the batteries recharge.
When the video monitor/receiver battery is recharging, the channel indi-
cator glows orange. When the battery is fully charged the indicator color
changes to green and the unit can be unplugged from the power adapter.
The camera/transmitter does not have a recharging indicator.
cator glows orange. When the battery is fully charged the indicator color
changes to green and the unit can be unplugged from the power adapter.
The camera/transmitter does not have a recharging indicator.
It takes approximately three hours to recharge the receiver and 18 hours
to recharge the transmitter. The batteries have a built-in overcharge
protector that will automatically stop recharging when they are fully
charged.
to recharge the transmitter. The batteries have a built-in overcharge
protector that will automatically stop recharging when they are fully
charged.
Power Adapter/
Recharger Port
Indicator LED glows
orange when charging
Marasst.book Page 14 Thursday, June 19, 2003 6:05 PM