Linksys RE6350 Manual De Usuario
you will use for setup. The setup software will help you find the best spot if you have
trouble.
<Diagram>
trouble.
<Diagram>
2. Wait for a solid light on the cover of the range extender. It could take up to two minutes.
On a computer, phone or tablet, connect to the Wi-Fi network “Linksys Extender Setup.”
<diagram2>
<diagram2>
3. If setup doesn’t start automatically, open a browser to http://extender.linksys.com.
Linksys’s Spot finder technology
will help you find the right location for your range
extender if you have trouble. You will be guided to place the range extender closer or
farther from your router to improve the signal. If you nailed it with your first placement
you will not see Spot finder screens.
farther from your router to improve the signal. If you nailed it with your first placement
you will not see Spot finder screens.
<screenshot of Too Far page>
4. During setup you will be asked whether you want the range extender to update itself
automatically. If you allow automatic updates, the range extender will download and install
updates when released by Linksys. Automatic updates will take place overnight so they do not
disrupt your network activity.
updates when released by Linksys. Automatic updates will take place overnight so they do not
disrupt your network activity.
You also can decide to manually update your range extender at your convenience.
<screen shot>
Post set-up LED behavior mention here as well and in the QSG
TIP
You can also connect the range extender by using Wi-Fi Protected Setup. For more
information, see “Using Wi-Fi Protected Setup” on page 7.
You can also connect the range extender by using Wi-Fi Protected Setup. For more
information, see “Using Wi-Fi Protected Setup” on page 7.
How to access the browser-based utility
After setting up the extender use the extender’s browser-based utility to change any
settings.
settings.
On a computer or device that is connected to your range extender, open any browser
(Internet Explorer, Chrome, Firefox, Safari, etc.), and enter extender.linksys.com in the
address bar.
(Internet Explorer, Chrome, Firefox, Safari, etc.), and enter extender.linksys.com in the
address bar.
You will be prompted to enter a user name and password. If you did not change them
during setup, leave the user name blank and enter “admin” in the password field. If
you customized the SSID and password, enter those credentials.
during setup, leave the user name blank and enter “admin” in the password field. If
you customized the SSID and password, enter those credentials.