Linksys WAP200 Manual De Usuario
28
Chapter 6: Configuring the Wireless-G Access Point
The AP Mode Tab
The AP Mode Tab
Wireless-G Access Point with Power Over Ethernet and Rangebooster
MAC Address
The MAC address of the Access Point is displayed here.
Access Point. The Mode is set to Access Point by default. This connects your wireless PCs to a wired network. In
most cases, no change is necessary.
most cases, no change is necessary.
Allow wireless signal to be repeated by a repeater. Select this option if you want to use another wireless
device to repeat the signal of this Access Point. You will need to enter the MAC address(es) of the repeating
device(s). Up to 3 repeaters can be used.
device to repeat the signal of this Access Point. You will need to enter the MAC address(es) of the repeating
device(s). Up to 3 repeaters can be used.
Wireless Repeater. When set to Wireless Repeater mode, the Wireless Repeater is able to talk to up a remote
access point within its range and retransmit its signal. Click Site Survey to select the access point that will have
its signal repeated by this Access Point or enter the MAC address of the access point manually.
access point within its range and retransmit its signal. Click Site Survey to select the access point that will have
its signal repeated by this Access Point or enter the MAC address of the access point manually.
WAP200
Desktop
Access Point
Switch
Laptop
Laptop
Desktop
Wired LAN
Internet
Modem
(Wireless Repeater mode)
Figure 6-18: Wireless Repeater Mode