Linksys WAP200 Manual De Usuario

31

Configure the event logging options for security monitor.

E-mail Notification

Recipient To. Enter the e-mail address that the alarm notifications should be sent to.

Alarm Type. Select the type of intrusions that should require an e-mail notification.

•

Rogue AP Detected. Indicates a rogue access point has been detected.

•

AP SSID Changed. Indicates the Access Point’s SSID has been changed.

•

Spoofed MAC Address. Indicates another device is using the AP’s MAC address to send out packets.

•

Client is Sending Spurious Traffic. Indicates an unassociated client is sending out frames to the AP.

•

Adhoc SSID same as AP. Indicates an Adhoc network uses the same SSID as the AP.

SYSLOG Notification

Logviewer IP Address. Enter the IP address of the system that will store the system log.

Alarm Type. Select the type of intrusions that should require an e-mail notification.

•

Rogue AP Detected. Indicates a rogue access point has been detected.

•

AP SSID Changed. Indicates the Access Point’s SSID has been changed.

•

Spoofed MAC Address. Indicates another device is using the AP’s MAC address to send out packets.

•

Client is Sending Spurious Traffic. Indicates an unassociated client is sending out frames to the AP.

•

Adhoc SSID same as AP. Indicates an Adhoc network uses the same SSID as the AP.

Security Monitor Server

This is a special Syslog server that can record all security monitor events instead of selected events.

Server IP Address. Enter the IP address of the server.