Linksys WGA11BV1 Manual De Usuario

7

6

The Game Adapter can be set up
by holding down the Channel
Selector button until it flashes and
then clicking the button to cycle to
the appropriate setting on the
LED display, as shown in Figure
4-3.

When playing Head-to-Head:

Set both Game Adapters to the same chan-
nel, 1-11.

When playing over the Internet: Set the Game Adapter to IN when using a

simple wireless network with no WEP
encryption settings and SSID enabled.

Chapter 4: Simple SetUp

1. Plug the included Ethernet network cable into the Game Adapter’s LAN

port, as shown in Figure 4-1.

2. Plug the other end of the Ethernet network cable into your

PC’s RJ-45 port.

3. Plug the supplied power cable into the Game Adapter’s

Power port, as shown in Figure 4-2. Then, plug the other
end into an electrical outlet, preferably a surge protector. 

4. Start your PC.

Note: If your wireless network uses WEP encryption and/or has
SSID disabled, the Game Adapter should be configured with its
Setup Wizard to use one of the three available profiles. Profiles
show up on the LED display as “P1”, “P2”, or “P3”. Once the
Game Adapter is configured with its Setup Wizard, select the
appropriate profile from the LED display. This is explained further
in “Chapter 5: Configuring the Wireless-B Game Adapter with the
Setup Wizard”.