Linksys WMP110 Manual De Usuario

Proceed to the appropriate instructions.
WPA (W-F Protected Access )

If  the  network  uses  WPA2  Personal  security,  then 
the  WPA2-Personal  Key  Needed  for  Connection  screen 
appears.

WPA2-Personal Security

Enter  the  network’s  Passphrase  (also 

called a pre-shared key) of 8-63 characters.

To  connect  to  the  network,  click  Connect. To  cancel 
the connection, click Cancel.

If  the  network  uses  WPA  Personal  security,  then  the 
WPA-Personal Key Needed for Connection screen.

WPA-Personal Security

Enter  the  network’s  Passphrase  (also 

called a pre-shared key) of 8-63 characters.

To  connect  to  the  network,  click  Connect. To  cancel 
the connection, click Cancel.

If the network uses WEP encryption, then the WEP Key 
or Passphrase Needed for Connection screen appears. 

1.

WEP Security

Enter the Passphrase or WEP key.

The  passphrase  is  case-sensitive  and  must  be  16  or 
fewer  alphanumeric  characters.  It  must  match  the 
passphrase  of  your  other  wireless  network  devices 
and is compatible with Linksys wireless products only. 
(For non-Linksys wireless products, enter the WEP key 
manually.)

If  you  enter  the  network’s  WEP  key,  enter  the 
appropriate number of hexadecimal characters (“0” to 
“9” and “A” to “F”). For 64-bit encryption, enter exactly 
10  hexadecimal  characters.  For  128-bit  encryption, 
enter exactly 26 hexadecimal characters. 

To  connect  to  the  network,  click  Connect. To  cancel 
the connection, click Cancel.

Click Fnsh.

Congratulations

2.