Linksys WMP54GR Manual De Usuario

30

Appendix A: Troubleshooting

This appendix consists of two parts: “Common Problems and Solutions” and “Frequently Asked Questions.” This 
appendix provides solutions to problems that may occur during the installation and operation of the Wireless-G 
PCI Adapter with RangeBooster. Read the description below to solve your problems. If you can't find an answer 
here, check the Linksys website at www.linksys.com.

•

Reinsert the Wireless-G PCI Adapter with RangeBooster into your PC’s PCI slot.

•

Right click on My Computer and select Properties. Select the device manager and click on the Network 
Adapter. You will find the Wireless-G PCI Adapter with RangeBooster if it is installed successfully. If you 
see the yellow exclamation mark, the resources are conflicting. You will see the status of the Wireless-G 
PCI Adapter with RangeBooster. If there is a yellow question mark, please check the following:

•

Make sure that your PC has a free IRQ (Interrupt ReQuest, a hardware interrupt on a PC.) 

•

Make sure that you have inserted the right adapter and installed the proper driver.

If the Wireless-G PCI Adapter with RangeBooster does not function after attempting the above steps, remove 
the adapter and do the following:
•

Uninstall the driver software from your PC.

•

Restart your PC and repeat the hardware and software installation as specified in this User Guide.

configuration.
•

Make sure that the PC to which the Wireless-G PCI Adapter with RangeBooster is associated is powered 
on.

•

Make sure that your Wireless-G PCI Adapter with RangeBooster is configured on the same channel and 
with the same security options as with the other computers in the Infrastructure configuration.