Linksys WPC54GR Manual De Usuario

8

1. If you have wireless security enabled on your network, continue to step 2. If you don’t have wireless security 

enabled, continue to step 3. 

2. If your network has the wireless security WEP (Wired Equivalent Privacy) enabled, this screen will appear. 

Select 64-bit or 128-bit.

Then enter a passphrase or WEP key.

Passphrase - Enter a passphrase in the Passphrase field, so a WEP key is automatically generated. The 
passphrase is case-sensitive and should not be longer than 16 alphanumeric characters. It must match the 
passphrase of your other wireless network devices and is compatible with Linksys wireless products only. (If 
you have any non-Linksys wireless products, enter the WEP key manually on those products.)

WEP Key - The WEP key you enter must match the WEP key of your wireless network. For 64-bit encryption, 
enter exactly 10 hexadecimal characters. For 128-bit encryption, enter exactly 26 hexadecimal characters. 
Valid hexadecimal characters are “0” to “9” and “A” to “F”.

Then click Connect and proceed to Step 3.

If your network has the wireless security WPA Personal (Wi-Fi Protected Access) enabled, this screen will 
appear. 

Encryption - Select the type of algorithm you want to use, TKIP or AES, from the Encryption drop-down 
menu.

Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field. 

Then click Connect and proceed to Step 3.